Frozen pipes may be somewhat common in the wintertime. If your pipes do freeze, you want to check and see if the pipes are busted or cracked. If your pipes are frozen, you can use a hair dryer to try and thaw out the pipes. However, if this will not work, you will need to call in a drain line repair who may either try and thaw the lines out another way or they may just end up replacing the section of the line that is broken.
With a putty knife, carefully scrape the remaining parts of the wax ring from the area. Clean the spot so that the new wax ring will be level. Place a new wax ring on the opening and replace the toilet. Bolt it back onto the floor, reconnect the water line repair supply tube and watch for leaks as the water is turned back on.
The con to time well spent is only if the fix or installation works. Suddenly, when a pipe is squirting water or the dishwasher is leaking all over the floor, that time seems wasted instead of well spent. Now your time is wasted, plus you have to pay for a professional plumber to come over and fix the mess. That time could have been spent doing something else, like golfing or swimming or gardening.
10) Tighten down the closet bolts making sure NOT to use too much torque. You aren't installing tires on a race car here so, take it easy Mr. Goodwrench. You just want to hold the toilet in place, not crack the porcelain base of the toilet or damage the drain flange.
The water line repair most likely damaged your electrical outlets and lighting fixtures. Have a qualified electrician come in to evaluate and repair the electrical.
I bought a new kitchen sink from a brand name building supply company and hired a plumber to install it. After he had left and I filled up my new sink to wash my first load of dishes in it, I noticed the water level had dropped. You wouldn't want to feel my shock and imagine the angry words that came out of my mouth! I couldn't believe that I had spent $300.00 on a brand new sink that couldn't hold water!
Then, you can take your new shower parts home and reinstall them in the inner assembly. It is very important that everything be aligned properly and tightened to prevent leaks. Beware of over tightening, however, since this can also cause problems. Once you are sure everything is installed properly, replace the cover plate and turn the water back on to test your repair work. With a little bit of work, your do-it-yourself shower repair project can be a success. It does not take an expert, just a little effort and know how.